DYSON dyson airblade wash&dry WD06 Wall Оригинал

dyson airblade wash&dry 

WD06 Wall 

TECHNICAL SPECIFICATION

Basin specification
The Dyson Airblade Wash+Dry hand dryer is compatible with most
basin types. Ensure plugs are not installed in the basins and avoid
inserts with embedded plugs (e.g. ones that swivel or elevate).
Using a specially designed test method, Dyson engineers evaluated
the user experience of a wide range of basin types when used with
the Dyson Airblade Wash+Dry hand dryer. For further details on our
recommended basins, please see the guide on our website dyson.com/docs
We recommend avoiding basins with the following geometric characteristics;
Flat bases immediately surrounding the drain hole.
(nominally within a 60 mm radius).
Sloping back and front wall transitions in relation to the base of the basin.
See our pre-installation guide for further details: dyson.com/docs
Basin dimensions:
All basin measurements are internal unless stated otherwise.
Minimum width of basin: 350 mm, Front to back-Minimum: 300 mm
Minimum depth of basin: 100 mm
Basin materials: Basins with highly polished surfoces should be avoided,
e.g. reflective chrome. Porcelain or brushed metal is ideal. When multiple taps
are installed side-by-side, tap centres should be a minimum
of 580 mm apart.

Standard warranty
5 year parts, 5 year labour.

Electrical

Input voltage/Frequency: 200-240V 50-60Hz
Motor specification: 1 000W digital brush less motor
Operating temperature range: 0°-40° C, 32°- 104°F
Heater type: None
Standby power consumption: Less than 0.5 W

Construction
Tap construction: Stainless steel (brushed)
Under counter motor assembly construction: Moulded ABS (main unit)
Exterior screw type: Torx Tl 5
Water ingress protection to IP35

Filter
HEPA filter (glass fibre and fleece prelayer)
Captures 99.95% of particles the size of
bacteria (0.1 microns) from the washroom air1

Operation
Touch-free infra-red activation
Hand dry time measurement: 14 seconds2
Operation lock-out period: 30 seconds
Airspeed at apertures: 341 mph/549 km/h
Maximum altitude: 2,000 metres / 6,562 ft.

Water operation
Water flow rate: 1.9 I/min normal fitted aerator.
4 I/min with low flow aerator supplied with product.
Water temperature control: Thermostatic mixer recommended (not supplied)
Water pressure required: 1-8 bar
Equipped with automatic duty flush —
every 24 hours for 60 seconds after the last use.

Logistics
Net weight: WD04 4.26 kg; WD06 9.51 kg
Packaged weight: WD04 6.76 kg; WD06 13.65 kg
Packaged dimensions: WD04 H303 X W284 X D291 mm
WD06 H610 x W375 x D302 mm

FLOOR

Tap dimensions 
WD06 Length 312 mm Width 303 mm

Motor bucket dimensions

WD06 Height 266 mm Width 142 mm Depth 189 mm

Minimum clearance

Suggested installation height 955mm from finished floor to centre of tap,
depending an height of basin. Check installation guide for further details.

Warranty conditions

1. The company guarantees the product for a period of 5 year from the date of purchase or delivery date.
2. The product warranty covers only product problems caused by manufacturing.
3. Product repair service center

Sangchai Air Quality Co., Ltd.

No. 88 Building B, Floor 2-3, Borommaratchachonnani Road, Chimplee Sub-district, Taling Chan District, Bangkok 10170

Telephone 0-2446-5666  Fax. 0-2446-5615

Contact Service Department Tel. 0-2446-5666